A two-port 10/100Base-TX to 100Base-FX Fast Ethernet media converter enables those production equipment (e g, PLC, power meter) to be managed in remote end via fiber connection.
Along with the fast increase of network developing, the range for the network distribution system has been expanded in high speed. Fiber connection providing a cost effective yet reliable networking deployment solution has been widely installed in the corporate and industrial fields. Finding a networking device to enable those industrial production equipments (e g, PLC, power meter) managed in remote end via fiber connection becomes a desperate need.
It not only save the time for new equipment transition but also maximize the investment by prolonging the working life of equipment.
Korenix JetCon 1302, a two-port 10/100Base-TX to 100Base-FX Fast Ethernet media converter, will be the best solution for above application.
The additional 10/100Base -TX port gives extra flexibility to traditional Fiber media conversion.
It adopts slim industrial design, small dimension (H*W*D, 112mm * 30mm * 90mm) and little weight, to save rail space of compact system requirement.
The 10/100Base-Tx ports support auto 10M/100M date rate negotiation and auto crossing MDI/MDI-X.
The fiber port of JetCon 1302 supports multi-mode SC-type connector with maximum 2km transmission distance or single-mode SC-type connector with maximum 30km transmission distance.
Heavy-duty media converter for industrial design - in order to survive under harsh environment, JetCon 1302 chooses industrial-grade aluminum case with IP30 standard protection, a heavy-duty design suitable for industrial applications (permitted operating temperatures from -10 deg C to +70 deg C, fan-less).
Built-in HIPOT 1500V AC and RJ-45 port to port 1500V AC isolation protection are providing the best device protection to against the abnormal impact when operating in harsh environment.
* Easy installation and diagnosis - JetCon 1302 is equipped with a 2-pin terminal block to connect power with auto polarity protection.
JetCon 1302 can be powered by 18-27V AC or 18-32V DC.
For easy diagnosis, port link status/ data rate and power LEDs have been also implemented on the front panel to provide the quick indication of converter operating status.
JetCon 1302 also provides one relay output to alarm port break events, which is enabled by the DIP switch.
JetCon 1302 Industrial two-port Fast Ethernet to Fiber Media Converter has features as follows.
* Two 10/100-TX Ports and one 100-FX port.
* Slim-sized for small industrial networking application.
* Convert two 10/100TX to Fiber Optic Network.
* Support 10/100Base-TX Auto MDI/MDI-X and Auto Negotiation.
* 18-27V AC or 18-32V DC Power Input with auto polarity.
* Protection in two-pin Terminal Block.
* Relay Output Alarm for port link failure.
* Aluminum case with IP 30 protection.
* Port to port 1500VAC isolation protection.
* DIN-Rail mountable.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment